Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Before starting upload process is canceled

Created by: Sinanyan at: 10/3/2024 11:39 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/3/2024 11:39 AM	Rate (0)
Sinanyan Posts: 1 Rating: (0)	Hi. I try upload program in plc S7 1200 but before starting upload process is canceled, could you help me? ------------------------------------------------------------------------------------------ Split from How to upload dnp3 configuration and tags from s7-1200?.
Sinanyan Posts: 1 Rating: (0)	Last edited by: Moderator_Lan at: 10/04/2024 09:07:47 New subject after splitting
Suggestion To thank Quote Answer

10/4/2024 2:50 PM	Rate (0)
itafusna Gold Member Joined: 2/17/2020 Last visit: 1/15/2026 Posts: 1251 Rating: (237)	Hi, What version of TIA Portal do you have installed and what version of TIA was the S7-1200 originally programmed with? Do they match? Can you even establish an online connection with the S7 PLC?
	A rating will be well appreciated.
Suggestion To thank Quote Answer

10/7/2024 12:08 PM	Rate (0)
sancruz Gold Expert Joined: 3/11/2019 Last visit: 1/7/2026 Posts: 1653 Rating: (322)	Hi, is it an older S7-1200? Which product number and firmware does the cpu have?` Because some older S7-1200 simply did not support the upload. regards sancruz
	Feedback appreciated, please rate
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on