Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Same Software, Different Font Sizes

Created by: Robotek-1 at: 10/22/2024 2:09 PM (2 Replies)

Rating (2)

Thanks 3

3 Entries

10/22/2024 2:09 PM	Rate (0)
Robotek-1 Joined: 7/16/2023 Last visit: 12/11/2024 Posts: 4 Rating: (0)	Hello, I'm experiencing this issue with font sizes on HMI. I had TIA 17 update 7 on my work computer's VM. Now, I have it on the host machine, as well. I noticed lately that when I download HMI software from host machine, the fonts are displayed smaller than when I download same software from VM. Again, identical software shows differently on HMI screen, depending on which machine I use to download it. Looked through settings on both TIA instances, did not see any differences. I'm running Windows 10 Pro. PLC is CPU1518F-4, HMI TP1200 Comfort Pro. Any help, please?

Suggestion To thank Quote Answer

10/22/2024 3:00 PM	Rate (1)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hello, Please have a look at the following link: Why are fonts and objects shown shifted on a PC Runtime system or operator panel? Best regards, Wizard

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Murof Robotek-1

10/24/2024 8:41 AM	Rate (1)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 12/19/2025 Posts: 16612 Rating: (1943)	Hello Robotek-1 If you download to a Comfort panel then set your DPI Settings to 100% -< do a Compile-> Software(rebuild all) and then download to the Panel. then you will get the same font sizes on Engineering PC and Comfort Panel. If you have a PC Runtime then you can also use other DPI settings but you will have to use the same settings on ES and RT System to get the same results. Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Robotek-1

|

Share this page:

Share this page on...

Follow us on