Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

fonts shifted on Simulation and HMI

Created by: AutoGen_9689121 at: 11/26/2024 12:04 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

11/26/2024 12:04 PM	Rate (0)
AutoGen_9689121 Joined: 8/7/2024 Last visit: 10/8/2025 Posts: 13 Rating: (0)	I tried disabling some settings to solve this issue, but nothing seems to work.

Suggestion To thank Quote Answer

11/26/2024 12:46 PM	Rate (0)
Hazard_7 Bronze Member Joined: 5/30/2022 Last visit: 12/17/2025 Posts: 634 Rating: (103)	Hi, You can try the following option (fit to screen): Screen adjustment options If it does not work 1- Project language? Does the same thing happen with another language configured in the project? 2- Exact version of TIA PORTAL used? 3- Does it occur in other projects? Perform tests on a new basic project 4- You can also try deleting the IM Folder recompile again and try to simulate again: How do I delete the IM folder of my TIA Portal project?
	If this information really helps, you could use the Rate function. Best Regards.
Suggestion To thank Quote Answer

11/28/2024 9:27 AM	Rate (0)
AutoGen_9689121 Joined: 8/7/2024 Last visit: 10/8/2025 Posts: 13 Rating: (0)	Hello, I am currently using TIA Portal V19 and Unified Image V19.0 Update 3, but nothing seems to work properly. I tried different fonts, which helped slightly, but the issue persists. I reached out to Siemens for assistance, and they informed me that it appears to be a bug. They mentioned that my project will be sent to their headquarters for further investigation.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Murof

|

Share this page:

Share this page on...

Follow us on