Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Set local time s71200

Created by: Fedenaa at: 1/28/2013 9:08 PM (12 Replies)

Rating (1)

Thanks 1

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

10/24/2013 12:09 PM	Rate (0)
Robinsondelaisla Posts: 1 Rating: (0)	Hello,I had the same problem than you, I couldn´t correct the UTC in my PLC,1214 AC/DC/RLY v1.0. So when I tried to update the hour through "Online & diagnostic", it resulted me to two hours before. I got conclusion that the key question is the version. Because in v1.0 the advanced instruccion SET_TIMEZONE doesn´t appear active to use, but it appears in the version V2.1. So it seems it could be the same with setting the UTC online.
Robinsondelaisla Posts: 1 Rating: (0)	Last edited by: Robinsondelaisla at: 10/24/2013 12:18 PM
Suggestion To thank Quote Answer

10/24/2013 1:42 PM	Rate (0)
RND Posts: 17 Rating: (0)	My problem did sort itself out. Once I did a full download to the CPU it then corrected the time zone to the settings made in the Device configuration\Time of day. I did not use SET_TIMEZONE insruction.
RND Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

12/28/2024 12:17 PM	Rate (0)
ictec Regular Member Joined: 11/7/2012 Last visit: 9/15/2025 Posts: 3 Rating: (0)
	Last edited by: Moderator_Lan at: 12/30/2024 11:30:12 Video embedded.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on