Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

ABT Site - Desigo Automation Controllers - Warning Limit

Created by: MatheusTorelli at: 11/27/2024 8:43 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

11/27/2024 8:43 PM	Rate (0)
MatheusTorelli Member Joined: 11/8/2021 Last visit: 8/12/2025 Posts: 2 Rating: (0)	Hello! I would like information regarding the Warning Limit option, as there is information about it in the ABT Site Help, but I did not understand the objective, since it is not possible to use the information because it does not generate the notification at the point. Is there any explanation for this? Or are there any plans for new features in this regard? Thank you very much in advance.
	Matheus Torelli Oliveira matheus.torelli@torrescx.com.br +55 11 96982-1500
Suggestion To thank Quote Answer

1/24/2025 9:41 AM	Rate (0)
Chris_PL Joined: 10/12/2023 Last visit: 9/12/2025 Posts: 119 Rating: (13)	I have the same question. Customer want to use Warning Limits but nothing happening with it.
	Best regards, Chris
Suggestion To thank Quote Answer

1/29/2025 11:07 AM	Rate (1)
Chris_PL Joined: 10/12/2023 Last visit: 9/12/2025 Posts: 119 Rating: (13)	Hi guys, Update from Siemens Support guys: The warning limit is not yet fully implemented. As the help says it "changes" status from Normal to Normal. The next version of ABT (v 6.0) will implement this functionality. And in Desigo CC v9 this will also be supported here. As far as I understand this it will create an intrinsic alarm in a separate BACnet object that has its own Notification Class. But within Desigo it will look as the same object.
	Best regards, Chris
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users MatheusTorelli

|

Share this page:

Share this page on...

Follow us on