STL to LAD - TIA v16

Hi All,

Beginner when it comes to STL and would like to cross reference some STL code by converting an new FC block into LAD, seeing how the statements and instructions are used.

The block of STL I am converting is actually copied from one network in an FC written predominantly in LAD, so cant simply convert this existing block as a test. I'm  pasting / defining into a new "test" FC.

However, once complied, I cannot switch programming language from ST to any other language, let alone LAD, all options are greyed out.

Controller is an S7-1500.

Any help would be appreciated.

Hello Kreskin!

Have a look.

https://support.industry.siemens.com/forum/se/en/posts/convert-stl-to-ladder/183186

(Tip, try search for the problem on google before you create a post).

Br

gvatte

Hello Kreskin!

Have a look.

https://support.industry.siemens.com/forum/se/en/posts/convert-stl-to-ladder/183186

(Tip, try search for the problem on google before you create a post).

Br

 Trust me, I did, and I have found some help. Thank you.

Hmm okay, have you followed these steps? Link?

Br