Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TIA Portal V15.1 Openness, Reset Know-How Protection

Created by: EIhg at: 1/10/2019 10:53 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/10/2019 10:53 PM	Rate (0)
EIhg Posts: 15 Rating: (0)	According to the attached slide I linked about the changes for TIA Portal V15.1, it would appear that it is possible to reset the know-how protection of a block using Openness, but I have not be able to find out how to do that as there is no documentation. Here is what I tried below, but it did not work: selectedblock.SetAttribute("IsKnowHowProtected", false); Any help would be greatly appreciated. Attachment Know-How Protection.PNG (950 Downloads)
EIhg Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

5/13/2020 4:28 PM	Rate (0)
TimiA Posts: 1 Rating: (0)	Check this chapter 7.18.12.7 Setting and removing protections from a block from the following manual https://wydarzenia.siemens-info.com/siemensevents-srv/api/v1/event-file/47/file Hope this helps
TimiA Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/10/2025 9:41 AM	Rate (0)
ADAM T Regular Member Joined: 7/22/2010 Last visit: 1/7/2026 Posts: 4 Rating: (0)	Did you ever figure out how to turn off know how protect if you forgot password?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA Openness

Follow us on