Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TIA Portable can't fail to start after installation of STARTDRIVE_ADVANCED_V19_SP1

Created by: AutoGen_921682 at: 4/22/2025 11:44 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/22/2025 11:44 AM	Rate (0)
AutoGen_921682 Regular Member Joined: 4/28/2015 Last visit: 5/29/2025 Posts: 1 Rating: (0)	Dears I had TIA Portable version 19 update_1 And i installed the STARTDRIVE_ADVANCED_V19_SP1 But once i finished the installation and restart the PG, The TIA Portal is not opened and give me this massage" Tai portal cannot be started because the installed products of the TIA Portal have different version " My question is how can i remove this STARTDRIVE_ADVANCED_V19_SP1 to enable me to open the TAI Portal V19 Attachment Tai portal cannot be started because the installed products of the TIA Portal have diffirent version.jpeg (94 Downloads)

Suggestion To thank Quote Answer

4/22/2025 11:55 AM	Rate (0)
BigMek Joined: 7/24/2024 Last visit: 9/18/2025 Posts: 73 Rating: (18)	Hi, Startdrive V19 SP1 needs TIA Portal V19 Update 2 as a prerequisite, so installing the newest update for TIA V19 should fix this.

Suggestion To thank Quote Answer

4/22/2025 12:04 PM	Rate (0)
JimHalpert Joined: 7/11/2024 Last visit: 9/9/2025 Posts: 200 Rating: (27)	Hello, This error appears because not all programs have the same update installed. You can download the updates at: Updates for STEP 7 V19, S7-PLCSIM V19 and WinCC V19 In case you want to uninstall Stardrive, you can follow the procedure of this FAQ: Startdrive: How to uninstall Startdrive Good luck!
	If this post has been useful, don't forget to rate it!😊
Suggestion To thank Quote Answer

4/22/2025 12:05 PM	Rate (0)
Tarwar Member Joined: 7/31/2020 Last visit: 9/17/2025 Posts: 87 Rating: (6)	Hello, You find the newest Update here: https://support.industry.siemens.com/cs/ww/en/view/109925643

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on