Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

In the analog card EM235, when the analog input exceeds 18 mA, the automaton goes to Stop and SF lights up.

Created by: Eduardo lasheras at: 5/12/2025 8:08 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/12/2025 8:08 AM	Rate (0)
Eduardo lasheras Joined: 9/8/2022 Last visit: 7/2/2025 Posts: 1 Rating: (0)	In the analog card EM235, when the analog input exceeds 18 mA, the automaton goes to Stop and SF lights up. I have replaced the card with a new one and it does the same. Could you guide me a little to try to deduce where the problem might be coming from??? Thank you very much.

Suggestion To thank Quote Answer

5/13/2025 8:34 AM	Rate (0)
Henry1675 Bronze Member Joined: 3/9/2018 Last visit: 9/3/2025 Posts: 208 Rating: (18)	Does MicriWin tell you, under PLC information, the reason for the fault?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on