Navigation

WinCC product details and archiving the data using scheduled tasks

Created by: its_Suhas at: 5/27/2025 2:59 PM (1 Replies)

5/27/2025 2:59 PM	Rate (0)
its_Suhas Joined: 5/17/2023 Last visit: 12/29/2025 Posts: 8 Rating: (0)	Hello, I have TP1200 comfort and TP1500 comfort panels in production and would like to configure Audit Trail functionality for the plants. The HMI project is in TIA v13. I am looking for a WinCC Audit license for these 2 panels, and 2GB SD card to store the audit Trail data.So I wanted to know if the product numbers listed below are the right ones for the two comfort panels TP1200 and TP1500. SD card: 6AV2181-8XP00-0AX0. WinCC Audit License: 6AV2107-0RP00-0BH0. Also, I wanted to archive the data from SD card to a folder in an network path (\\srvhpa….) using “Scheduled Tasks” in TIA v13. To access the folder from the HMI, should I set it up as a shared folder? Are there any additional configurations required for the HMI to access the folder?
	Last edited by: its_Suhas at: 05/30/2025 15:32:34
Suggestion To thank Quote Answer

6/2/2025 1:25 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 12/19/2025 Posts: 16612 Rating: (1943)	Hello its_Suhas The order numbers sounds good to me but if you want to have a 100% confirmation you should contact your local Siemens sales contact. for accessing networks drives and copying audit files you can have a look at these two FAQs: https://support.industry.siemens.com/cs/ww/en/view/92346478 https://support.industry.siemens.com/cs/ww/en/view/63042926 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users its_Suhas