Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

tp1200 Comfort with Simatic Logon

Created by: aleb2 at: 9/6/2023 6:05 PM (13 Replies)

Rating (0)

Thanks 5

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

9/24/2023 7:28 AM	Rate (0)
aleb2 Experienced Member Joined: 7/12/2006 Last visit: 4/10/2025 Posts: 134 Rating: (0)	Yes, my hmi is on another subnet, and the folder " rejected" is empty

Suggestion To thank Quote Answer

9/29/2023 10:24 AM	Rate (0)
Michael K Gold Member Joined: 9/3/2008 Last visit: 1/5/2026 Posts: 947 Rating: (164)	Hi, Then make sure that your subnet is routed correctly to the Simatic Logon subnet and the port 16389 is not blocked. The error "server not available" means that the panel litteraly cannot connect to the Simatic Logon server. Best regards Michael
	Michael
Suggestion To thank Quote Answer

10/11/2023 2:31 PM	Rate (0)
aleb2 Experienced Member Joined: 7/12/2006 Last visit: 4/10/2025 Posts: 134 Rating: (0)	The problem was the port 16389 not opened by IT Thanks

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Jen_Moderator rodolfochacin

6/19/2025 2:02 PM	Rate (0)
AutoGen_6093430 Joined: 3/11/2025 Last visit: 10/31/2025 Posts: 11 Rating: (0)	Handy command in Powershell to test ports Test-NetConnection -ComputerName 10.22.22.33 -Port 16389 should return a True

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on