Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

SIMATIC NET PC Software V20 Silent Install Command for MDT

Created by: AutoGen_3431633 at: 6/20/2025 5:58 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/20/2025 5:58 PM	Rate (0)
AutoGen_3431633 Joined: 6/18/2025 Last visit: 7/1/2025 Posts: 1 Rating: (0)	Is there a silent install command for SIMATIC NET PC Software V20 that I can use to silently install the software when I image a PC with Windows 11 Enterprise LTSC using MDT? I am trying to install SIMATIC NET PC Software V20 silently when I image a PC with Windows 11 Enterprise LTSC using MDT but can't find the right silent install command. The commands I have tried still end up pulling up the installer menu and make it so I have to click through the menus to install the software. Once I click through all the menus and try to install, I get an error message saying restart Windows before installing new programs.

Suggestion To thank Quote Answer

6/24/2025 8:30 AM	Rate (0)
Murof Platinum Member Joined: 8/3/2009 Last visit: 12/19/2025 Posts: 16612 Rating: (1943)	Hello check out these information in the manual regarding the automatic installation process: https://support.industry.siemens.com/cs/ww/en/view/109977703/170822164491 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on