Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

OP77A

Created by: Aliende at: 6/28/2006 12:39 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/28/2006 12:39 PM	Rate (0)
Aliende Posts: 18 Rating: (3)	Hi I need some informations on OP77A. 1)I like to know haw can I swich on the leds under system keysK1-K4. Before I work with protool and OP7 but with WinCC and OP77A its diferent. I cant find some detail description of this part. 2) Haw can I transfer system key to PLC like ACK, ENTER... In protull and OP7 was this two words. Hear is diferent. 3)I like to know it is posible to view the alarm history bufer and how? 4) My last question is abaut date and hour Ther is no beckup batery. Haw can I made this .Exist some solution. Can I use PLC job like in OP7 and wher can I find some discription of this part. Thenks Aliende
Aliende Posts: 18 Rating: (3)
Suggestion To thank Quote Answer

6/28/2006 2:09 PM	Rate (0)
Nemo Posts: 3149 Rating: (172)	Hi, perhaps you can find the information here: http://support.automation.siemens.com/WW/view/en/18797552 http://support.automation.siemens.com/WW/view/en/21084916 nemo
Nemo Posts: 3149 Rating: (172)
Suggestion To thank Quote Answer

6/28/2006 2:22 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hi, Use Template to connect a tag to K1 etc, to use LED. In Template it's possible to connect a function to the system key's Date and time: you'll have to synchronise with CPU, with PLC-job's http://support.automation.siemens.com/WW/view/en/19355865 Best regards, Wizard

Suggestion To thank Quote Answer

6/29/2006 3:43 PM	Rate (0)
Aliende Posts: 18 Rating: (3)	Hi Wizard and Nemo Thanks for help its better now. Best regards
Aliende Posts: 18 Rating: (3)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on