Navigation

UPLOAD FROM ENGINEER TO REDUNDANCY WINCC PROFESSIONAL

Created by: JohnPeter_1995 at: 1/13/2026 2:27 PM (1 Replies)

1/13/2026 2:27 PM	Rate (0)
JohnPeter_1995 Joined: 6/12/2025 Last visit: 1/16/2026 Posts: 12 Rating: (0)	Dear Sir I'm working with WIncc Professional in Tia Portal V18. I tried upload project from engineer computer to 02 redundancy server. But error happan like picture. Although I open discovery network and access to folder of servers normally. Can anyone help me please. Many thank.

Suggestion To thank Quote Answer

1/16/2026 12:56 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 1/16/2026 Posts: 16644 Rating: (1944)	Hello JohnPeter_1995 Check your ES and OS with the following FAQ, perhaps some configuration steps were not made on this systems : https://support.industry.siemens.com/cs/ww/en/view/88780011 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer