Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Uploading a station

Created by: Tomy Master at: 7/23/2009 1:36 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/23/2009 1:36 AM	Rate (0)
Tomy Master Platinum Member Joined: 5/4/2009 Last visit: 12/21/2025 Posts: 916 Rating: (40)	Hello people..... I got a question: When "uploading a station" that consists of a central rack ( CPU400 + DI +DO ) and this rack is conected to a distriputed peripherie ( ET200 ), will all data related to distriputed peripherie be uploaded too? And if not how could "re-download" it again, should I configure the hardware configuration again? Regards. Thomas.
	Aim Higher
Suggestion To thank Quote Answer

7/23/2009 2:25 AM	Rate (0)
Maha Posts: 118 Rating: (4)	Hi, Yes, U can upload all Hardware configuration with all remot modules including the Parameters of that paricular modules.
Maha Posts: 118 Rating: (4)
Suggestion To thank Quote Answer

7/23/2009 6:34 AM	Rate (0)
naah Posts: 76 Rating: (8)	Hi, It must be uploaded when you upload the station. If the ET200 configuration has not uploaded, then it is not configured in CPU400. Good luck!
naah Posts: 76 Rating: (8)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on