Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Download OB86 to S7 315-2 PN/DP

Created by: RasaIcce at: 7/20/2009 12:45 PM (5 Replies)

Rating (0)

Thanks 2

6 Entries

7/20/2009 12:45 PM	Rate (0)
RasaIcce Posts: 32 Rating: (0)	Hallo everyone ! I have a problem to download OB86 to the PLC 315-2 PN/DP and every time when I turn off device connected on the PB , PLC goes to stop mode (SF). I know that I need OB86 but when I try to download it, I get information : Unable to copy block to PLC. What can I do?
RasaIcce Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

7/20/2009 1:39 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	RasaIcce Hallo everyone ! I have a problem to download OB86 to the PLC 315-2 PN/DP and every time when I turn off device connected on the PB , PLC goes to stop mode (SF). I know that I need OB86 but when I try to download it, I get information : Unable to copy block to PLC. What can I do? What is inside your OB86?
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer

7/20/2009 2:08 PM	Rate (0)
RasaIcce Posts: 32 Rating: (0)	I have one network with MOVE block : IN:#OB86_MDL_ADDR OUT:MW2504
RasaIcce Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

7/20/2009 2:14 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	RasaIcce I have one network with MOVE block : IN:#OB86_MDL_ADDR OUT:MW2504 Hi Rasalcce, Please change the MW2504, it is not allowed. The maximum you can use is MW2046 See technical info CPU. Best regards, Wizard

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users pankaj_054

7/20/2009 2:23 PM	Rate (0)
RasaIcce Posts: 32 Rating: (0)	OK, thank's!!! I'll try and announce you .
RasaIcce Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

7/24/2009 3:12 PM	Rate (0)
RasaIcce Posts: 32 Rating: (0)	OK, Thank's a lot!
RasaIcce Posts: 32 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Wizard

|

Share this page:

Share this page on...

Follow us on