Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Positions change in a DWORD

Created by: Denker at: 7/24/2009 4:19 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/24/2009 4:19 PM	Rate (0)
Denker Posts: 90 Rating: (0)	Hello, I need to change the positions of 4 bytes in a DWORD, as showed in the attached file.Is there a function block to do that or another better way ? Best regards ! Attachment image.JPG (295 Downloads)
Denker Posts: 90 Rating: (0)
Suggestion To thank Quote Answer

7/24/2009 4:42 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	Denker Hello, I need to change the positions of 4 bytes in a DWORD, as showed in the attached file.Is there a function block to do that or another better way ? Best regards ! command TAD and TAW can be helpful.
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer

7/24/2009 6:28 PM	Rate (0)
Denker Posts: 90 Rating: (0)	Hello IBN-Service, Thank you very much! It is what I really need. Best regards.
Denker Posts: 90 Rating: (0)
Suggestion To thank Quote Answer

7/24/2009 6:39 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	Denker Hello IBN-Service, Thank you very much! It is what I really need. Best regards. You are welcome!
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on