Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

SIMODRIVE 611universal

Created by: MTE_Elsa at: 8/5/2009 9:54 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

8/5/2009 9:54 PM	Rate (0)
MTE_Elsa Posts: 6 Rating: (0)	Hi! I have some problems with " I don't know what" when I configured and load the configuration of a simodrive. This is the situation: I'm using a CPU317T-2 DP and hanging to the DP a SIMODRIVE. I think, I'm doing something wrong with the syncronisation, but I don't know what; because after save and compile and load to module in my CPU apperedthe BF 3 LED flashing. I've tried to change the values of syncronisation, even disable... but I get nothing. Do yo have any idea?.. or some information I can use Thanks
MTE_Elsa Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

8/6/2009 10:07 AM	Rate (0)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 4/9/2025 Posts: 333 Rating: (52)	hi i am attaching a document for configuring the 611U drive on profibus regards ram Attachment 611u39us.pdf (535 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users DETer

|

Share this page:

Share this page on...

Follow us on