Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

S7 manager doesn't update

Created by: brzAA at: 7/28/2009 9:05 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

7/28/2009 9:05 PM	Rate (0)
brzAA Advanced Member Joined: 2/28/2008 Last visit: 1/8/2026 Posts: 35 Rating: (2)	Hello All, Since a while now I have a small problem with S7 manager. If I delete or add a block (source folderor block folder) the folder contents is not refreshed. I have to press F5 (update in view menu)each time to get the correct view. When forgetting I got some strange situations especially working online with PLC. Did somebody experiment the same and found a solution ? My laptop is a Dell D830 with XPpro SP2 (still using ProTool). Many thanks for the attention. BR

Suggestion To thank Quote Answer

7/28/2009 9:27 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/14/2026 Posts: 9105 Rating: (1204)	Dear brzAA, Please tell us, the version of Step 7. And are you using any other software of Siemens? Best regards, Wizard

Suggestion To thank Quote Answer

7/31/2009 10:23 PM	Rate (0)
brzAA Advanced Member Joined: 2/28/2008 Last visit: 1/8/2026 Posts: 35 Rating: (2)	Dear Wizard, I'm using Step 7 Pro version 5.4 SP5 +HF1, ProTool v6.2 SP3 +HF3, winCC flexible standard 2008, Teleservice 6.1 +SP2, Drive Monitor 5.4.01.01, Starter 4.1.1.2, comProfibus 5.1.2.2. Looks a lot of things... anyway the problem occurs just with the S7 manager by itself (no ladder, no scl, etc.) asit also occurs if I use simultanously those like ladder or scl for instance. Thanks again for the attention. BR

Suggestion To thank Quote Answer

8/17/2009 1:44 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/14/2026 Posts: 9105 Rating: (1204)	Dear brzAA, The windows OS, you are using, was it pre installed on PC (Dell). Or is it a complete new installation? Best regards, Wizard

Suggestion To thank Quote Answer

8/17/2009 8:44 PM	Rate (0)
brzAA Advanced Member Joined: 2/28/2008 Last visit: 1/8/2026 Posts: 35 Rating: (2)	Sorry for thedelay to answer, I'm making a commissioning contract outside my country... No it was preinstalled by Dell.

Suggestion To thank Quote Answer

8/18/2009 8:59 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/14/2026 Posts: 9105 Rating: (1204)	Hi, If I understood right, it worked before. Is the problem come around, when you installed some software? (servicepack) Have you tried to repair Step 7? Best regards, Wizard

Suggestion To thank Quote Answer

8/18/2009 11:44 AM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	Hello, It possible this problem to come from COMPROFIBUS software. If I understood right you install both in one partition (one OS). Regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on