Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

1ft5 motor

Created by: M@M at: 8/26/2009 12:40 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/26/2009 12:40 PM	Rate (0)
M@M Posts: 2 Rating: (0)	hi all we have several 1ft5 motor that drive with simodrive 611 with this order no.6sc6111-2aa00 now we have a big probelem that is motor shaft is hot and we cant find problem.please help us about this problem
M@M Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/27/2009 8:33 AM	Rate (0)
vki Posts: 63 Rating: (3)	check motor bearing. if it is old motor there may be wear and tear in bearing.
vki Posts: 63 Rating: (3)
Suggestion To thank Quote Answer

8/29/2009 9:01 AM	Rate (0)
M@M Posts: 2 Rating: (0)	vki check motor bearing. if it is old motor there may be wear and tear in bearing. hi vki I change one of these motors with new motor but repeat problem tnax
M@M Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

9/4/2009 3:14 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 12/23/2025 Posts: 4566 Rating: (416)	M@M vki wrote: check motor bearing. if it is old motor there may be wear and tear in bearing. hi vki I change one of these motors with new motor but repeat problem tnax ======================= Hi, please give us more info. such as the motor order#, and your machine is a running one and how long you run this machine before the motor get hot. or you make only for test demo you have old Siemens 611 Analogue Servo Drive 12/24A.
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on