Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Indirect Addressing for DBs

Created by: Niranjan Prasad at: 9/20/2009 5:43 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/20/2009 5:43 PM	Rate (0)
Niranjan Prasad Posts: 691 Rating: (37)	Hello all i need help in reading the DB Parameters Values. I want to read the db values and set a marker acoording to it Any help will be appreciated Thanx in advance
Niranjan Prasad Posts: 691 Rating: (37)
Suggestion To thank Quote Answer

9/21/2009 12:21 PM	Rate (0)
smiffy Platinum Expert Joined: 1/17/2007 Last visit: 1/8/2026 Posts: 1561 Rating: (540)	I do not understand your question. What do you mean by "DB Parameters Values"? What do you mean by "set a marker acoording to it"? You can read information about a DB by using the TEST_DB. This will give you the size of the DB and it's write protect status.
	Programming today is the race between software engineers building bigger and better idiot proof programs, and the universe producing bigger and better idiots. So far, the universe is winning...
Suggestion To thank Quote Answer

9/21/2009 5:27 PM	Rate (0)
how come Posts: 382 Rating: (47)	Dear Niranjan, I don't quite understand your question. But are you loking for this Hope this helps! with regards, how come?
how come Posts: 382 Rating: (47)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on