Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

DTL to Time

Created by: MatjazG at: 9/23/2009 12:39 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/23/2009 12:39 PM	Rate (0)
MatjazG Posts: 2 Rating: (0)	Hello! How can system time in DTL be converted to TIME or DINT format (how Structs are managed)?
MatjazG Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

9/23/2009 1:49 PM	Rate (0)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 12/28/2025 Posts: 4434 Rating: (1487)	MatjazG Hello! How can system time in DTL be converted to TIME or DINT format (how Structs are managed)? Hi, There is no direct instruction to do it. However... When you use a DTL, you can "open" the data type and access different components (year, month, etc) individually. You can take this variables and calculate the desired time (for example sec + min60 + hour3600...). If you want measure time, thereare a instruction ( T_DIFF) thatsubtract with DTL and gives back a time variable. If you need to calcule a elapsed time, you can use this instruction.
	Last edited by: Pegaia at: 9/23/2009 1:50 PM Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

9/24/2009 7:40 AM	Rate (0)
MatjazG Posts: 2 Rating: (0)	Pegaia If you want measure time, thereare a instruction ( T_DIFF) thatsubtract with DTL and gives back a time variable. If you need to calcule a elapsed time, you can use this instruction. Thank you for your suggestion, T_DIFF instruction is going to be very useful.
MatjazG Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on