Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Problem Regarding FM350-2

Created by: Shatrujit at: 7/22/2009 7:22 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

7/22/2009 7:22 AM	Rate (0)
Shatrujit Posts: 7 Rating: (0)	How to create Counter Data-Block(DB) for FM350-2 in S7 Programme.
Shatrujit Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

7/22/2009 8:18 AM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	Hello, Look at SIMATIC FM 350-2 Brief Instructions on commissioning Hope this will helps. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

7/22/2009 8:21 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	Shatrujit How to create Counter Data-Block(DB) for FM350-2 in S7 Programme. The DB or the UDT are delivered with the example - program that also contains the control - FC. BTW. the FM350 is a counter, not a SIWAREX.
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer

7/22/2009 8:24 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	UMENCHO Hello, Look at SIMATIC FM 350-2 Brief Instructions on commissioning Hope this will helps. Best regards, Hristo Mihalev Dear UMENCHO, you was faster again. Please let youask me a question? Why you always show your tongue ??
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer

9/25/2009 5:03 AM	Rate (0)
how come Posts: 382 Rating: (47)	Dear Shatrujit, If I can understand your question, is this you are looking for? See my attach. I didn't manage to read your thread earlier hope this is not too late and help you in some way with regards, how come? Attachment Create DB for FM350-2.JPG (335 Downloads)
how come Posts: 382 Rating: (47)	Last edited by: how come? at: 9/25/2009 5:05 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on