Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

How to control analog output from a HMI input

Created by: NovoWorld at: 9/30/2009 2:58 AM (1 Replies)

Rating (1)

Thanks 1

2 Entries

9/30/2009 2:58 AM	Rate (0)
NovoWorld Posts: 15 Rating: (0)	Have a scale on the screen with a increase and decrease arrow - want to control and display the speed of a drive through a analog output card. Trying to get a NORM_X and SCALE_X to work but no luck. How do I get the scaling data to the QW112 output?
NovoWorld Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

9/30/2009 2:56 PM	Rate (1)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 8/27/2025 Posts: 4416 Rating: (1484)	Hi, Do you have already take a look at TIP on the forum about SCALE? https://www.automation.siemens.com/BR/tf/WW/en/Posts/31698#top
	Last edited by: Pegaia at: 9/30/2009 2:57 PM Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users NovoWorld

|

Share this page:

Share this page on...

Follow us on