Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

CPU 416-1 program memory

Created by: Garza at: 11/20/2009 7:19 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/20/2009 7:19 PM	Rate (0)
Garza Member Joined: 9/15/2009 Last visit: 12/12/2025 Posts: 2 Rating: (0)	Hi, I've got a problem and i'm try'n to solve it. I'm working in a machine who has a CPU 416-1 (6ES7416-1XJ02-0AB0). Everything was ok, then the cpu gets into stop mode and i couldn't solve this situation. I tried to reload the program to the CPU, but there was an unspected event: "there's not enough memory space to the program". How can be that posible? The programs is the same as the resident one in the plc. So, if anyone had the same problem before, please tell me how can i solve it. Thanks

Suggestion To thank Quote Answer

11/20/2009 7:42 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159)	Garza Hi, I've got a problem and i'm try'n to solve it. I'm working in a machine who has a CPU 416-1 (6ES7416-1XJ02-0AB0). Everything was ok, then the cpu gets into stop mode and i couldn't solve this situation. I tried to reload the program to the CPU, but there was an unspected event: "there's not enough memory space to the program". How can be that posible? The programs is the same as the resident one in the plc. So, if anyone had the same problem before, please tell me how can i solve it. Thanks Hi Garza, as you are downloading the backup again, Please checked the following things 1. In module information -> Memeory tab checked the Load memory & work memory 2. Are you using the RAM or Flash module. 3. Checked the point of error in Module information in Dignostic Buffer. 4. Thendownload the Backup. Ifyou cant able to download that means the PLC program is still in the PLC just compare the Same with your last backup. & your CPU having 512 KB WORKING MEMORY. so checked the best possible way you solve the problem.
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

11/20/2009 9:56 PM	Rate (0)
Garza Member Joined: 9/15/2009 Last visit: 12/12/2025 Posts: 2 Rating: (0)	Hi Ammy, Thanks for your response. I will try again, but i will take into acount your advice.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on