Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TP177A and WinCC Flex Version Difference

Created by: manassas at: 8/1/2006 2:43 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/1/2006 2:43 PM	Rate (0)
manassas Posts: 51 Rating: (0)	Hello, I have a TP177A (6AV6 642 0AA11 0AX0) and WinCC Flex 2005 Advanced. I am unable to download my HMI project into TP177A device. Whenever try that I am getting this message which is The connected device supports version '12' for the selected transfer type. The PC software only supports devices up to version '1'. How can I get my software support version 12? What should I do? I am using MPI/DP S7300 PC Adapter to connect to TP177A. I am success to download OS of TP177A into my Pc/laptop. Thanks in advance.
manassas Posts: 51 Rating: (0)
Suggestion To thank Quote Answer

8/1/2006 2:47 PM	Rate (0)
skimmer Posts: 317 Rating: (18)	Hi, It sounds like you need to upgrade to 2005 SP1. Entry ID:23059737 on the Siemens support site gets the download. Then maybe this version is supported.
skimmer Posts: 317 Rating: (18)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on