Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

redundant system with S7-400H

Created by: nonstop at: 12/11/2009 8:55 AM (2 Replies)

Rating (0)

Thanks 2

3 Entries

12/11/2009 8:55 AM	Rate (0)
nonstop Posts: 4 Rating: (0)	I want to creat a redundant system with S7-400H. There isn't any problem with connections distributed I/O, IM 153-2, and CPU 414H. this redundant system doesn't need PC, so it doesn't need Ethernet. I have only one MP 270B, so how to connect MP 270B to CPU through Ethernet or Profibus? Do i need YLink for it? Please tell me which way is better.
nonstop Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

12/11/2009 9:43 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Dear nonstop, Perhaps the following link, might help: http://support.automation.siemens.com/WW/view/en/22584322 Best regards, Wizard

Suggestion To thank Quote Answer

12/15/2009 7:21 AM	Rate (0)
nonstop Posts: 4 Rating: (0)	Thanks Wizard :) It's really good informations for me. [schnippschnapp] Best Regards, nonstop
nonstop Posts: 4 Rating: (0)	Last edited by: O_Moderator at: 12/15/2009 8:10 AM
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Wizard jvebed

|

Share this page:

Share this page on...

Follow us on