Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

programming help please

Created by: stagg at: 1/7/2010 11:08 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

1/7/2010 11:08 PM	Rate (0)
stagg Posts: 4 Rating: (0)	Hello. I try to do one thing that I though it was easy. I have 2 analog inputs (A1 A2). I need this: A1-A2=ax (can be negative) Q (output)=+10>ax<-10 Its a "comp in zone" but I can't find a fonction like this in the logo soft. Thanks for your help. Regards
stagg Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

1/8/2010 9:57 AM	Rate (0)
Fux Posts: 661 Rating: (123)	Use analog comparator. Attachment difference.zip (595 Downloads)
Fux Posts: 661 Rating: (123)
Suggestion To thank Quote Answer

1/8/2010 11:39 AM	Rate (0)
stagg Posts: 4 Rating: (0)	Hello, thanks for your help, but I can't open the file (difference). My soft is logosoft v6.0 Regards.
stagg Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

1/8/2010 2:33 PM	Rate (0)
stagg Posts: 4 Rating: (0)	this is what I need: (pic attached) thank you Attachment curve.jpg (559 Downloads)
stagg Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

1/8/2010 2:43 PM	Rate (0)
Fux Posts: 661 Rating: (123)	OK, seems, as if you don´t have installed the latest service pack. That´s why you can´t open the file. If you cannot update now, here the program again. You should be able to open this one. Attachment difference.zip (599 Downloads)
Fux Posts: 661 Rating: (123)
Suggestion To thank Quote Answer

1/8/2010 3:40 PM	Rate (0)
stagg Posts: 4 Rating: (0)	Thank you very munch :-) it works. Regards.
stagg Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on