Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Step 7 Cross Reference

Created by: bobdjones at: 1/28/2010 11:39 AM (4 Replies)

Rating (0)

Thanks 2

5 Entries

1/28/2010 11:39 AM	Rate (0)
bobdjones Posts: 12 Rating: (0)	I am using Step 7 5.4 SR 5. When viewing cross reference for two programs I get different views as shown in the attachment. I would like tomake both displays like the first one. I have searched through help and forums but cannot find any advice on this. Please help. Attachment crossref.zip (306 Downloads)
bobdjones Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

1/28/2010 12:30 PM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 10/16/2025 Posts: 10239 Rating: (1183)	Hello, Did you tried to "play" with filter' options in cross references? Regards, Hristo Mihalev

Suggestion To thank Quote Answer

1/28/2010 2:37 PM	Rate (0)
bobdjones Posts: 12 Rating: (0)	Yes I have played with all the filter options with no luck.
bobdjones Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

1/29/2010 7:57 AM	Rate (0)
daga Gold Member Joined: 3/18/2009 Last visit: 12/9/2025 Posts: 306 Rating: (95)	It seems in the second case "Symbol has priority" in the address priority setting of the Block Folder properties. If you change it to "Absolute value has priority" you should be able to see the cross references as you desire. However, symbolic programming and absolute address programming are two different ways of programming. And you may want to study the impact on your program before changing this property. Attachment AbsoluteProgramming.JPG (350 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users how come CABendek

1/29/2010 3:56 PM	Rate (0)
bobdjones Posts: 12 Rating: (0)	Thanks very much daga. This was the problem. Many thanks again. Bob Jones
bobdjones Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on