Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Update for CPU 315F-2PN/DP

Created by: tulinho at: 5/7/2010 4:31 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/7/2010 4:31 PM	Rate (0)
tulinho Posts: 16 Rating: (1)	Hello guys, I'm working with SIMATIC STEP 7 Version V5.4 Revision K.5.4.5.1 and tried to configure my hardware (I've got a CPU 315F-2PN/DP, firmware version V3.1.0) but in the hardware configure folder there's not this version (only versions before 2.6). I've tried to find an update in this website but I can't. Seems there be only the last updates. Well I wanna know if someone who worked with the same software and hardware get this update to help me solve my issue. Best regards, Marco Carmo
tulinho Posts: 16 Rating: (1)
Suggestion To thank Quote Answer

5/7/2010 4:48 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/16/2026 Posts: 9105 Rating: (1204)	Dear tulinho, Have you seen this link: Step 7 Hardware Support Packages (HSPs - as at 02/2010) Best regards, Wizard

Suggestion To thank Quote Answer

5/10/2010 2:01 PM	Rate (0)
tulinho Posts: 16 Rating: (1)	Dear Wizard, Well, first, I wanna thank you for answer me, but I already saw the link you posted. That update has the CPU version 3.1 but the CPU I'm using is the version 3.1.0 ( I don't know what the difference) and the software still prints a window with the message that the CPU configured in the software is different from the hardware. Best Regards tulinho
tulinho Posts: 16 Rating: (1)
Suggestion To thank Quote Answer

5/21/2010 1:54 PM	Rate (0)
Hormeda Posts: 13 Rating: (8)	Dear Tulinho, The HW Config only have two digits (x.y) for all cpu’s, the third digit only on cpu firmware module. Best regards, Sérgio Hormeda Siemens Industry Sector Industry Automation andDrive Technologies Division - Technical Support & Hotline -
Hormeda Posts: 13 Rating: (8)	Last edited by: Sérgio Hormeda at: 5/21/2010 1:57 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on