Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

event id - descriptions

Created by: Switch_639 at: 5/27/2010 9:11 AM (5 Replies)

Rating (1)

Thanks 3

6 Entries

5/27/2010 9:11 AM	Rate (0)
Switch_639 Experienced Member Joined: 4/30/2010 Last visit: 11/27/2025 Posts: 146 Rating: (2)	hello there... I downloaded a nice program on here to display event ID with time stamp of a cpu diagnostic buffer event... where can I find list of event ID descriptions... what they are? or even better, a DB or something someone created with the whole list of ID plus events so I can coordinate the ID's with the descriptions and display it all on one page...

Suggestion To thank Quote Answer

5/27/2010 11:25 AM	Rate (0)
Switch_639 Experienced Member Joined: 4/30/2010 Last visit: 11/27/2025 Posts: 146 Rating: (2)	here is a pic of what the program looks like... it shows the event id with time stamp which is cool... I want the description also somehow if possible... Attachment cpu.JPG (915 Downloads)

Suggestion To thank Quote Answer

5/28/2010 8:59 PM	Rate (0)
Ayman Elotaify Diamond Expert Joined: 5/28/2008 Last visit: 12/29/2025 Posts: 4522 Rating: (843)	Hello Switch_639, Please try this FAQ: Which meaning have the error codes (xxxx:yyyy) in STEP 7? With best regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

5/29/2010 8:18 AM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 10/16/2025 Posts: 10239 Rating: (1183)	Hello, A little bit OT. I am not sure you will find all event IDs plus descriptions. the idea is to read directly diagnostic buffer of CPU and disply it on HMI. In this way you'll sure that for each event number have description. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

5/29/2010 3:28 PM	Rate (0)
Ayman Elotaify Diamond Expert Joined: 5/28/2008 Last visit: 12/29/2025 Posts: 4522 Rating: (843)	Hello, Here's bellow useful links to show CPU messages in WinCC / WinCC flex. How can you report S7 system errors in WinCC? How can you have system error messages from a SIMATIC S7-300 / 400 displayed in WinCC flexible? Hope this helps,
	Ayman Elotaify
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users umencho

5/29/2010 4:19 PM	Rate (1)
fritz Diamond Expert Joined: 10/7/2005 Last visit: 12/29/2025 Posts: 3052 Rating: (1062)	Switch_639 I downloaded a nice program on here to display event ID with time stamp of a cpu diagnostic buffer event... where can I find list of event ID descriptions... what they are? Hello Switch_639 I too would rather use "Report System Error" as perAyman's previous post (you appear to be using a Siemens HMI anyhow). If you do however insist ondisplaying the CPU diagnostic buffer events your way (as perTHIS link), then you will be able to find a comprehensive list of all Event ID's and corresponding texts in chapter 34 of the System Software for S7-300/400 System and Standard Functionsmanual. One last hint: Newer S7 CPU'shave a Web Server inbuilt which allows access to the CPU diagnostic buffer amongst other things. All you now need is a Webbrowser to display the CPU diganostic buffer. I hope this helps
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users umencho Ayman Elotaify

|

Share this page:

Share this page on...

Follow us on