Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

STOP by execution system, cause: Timeout IPOsynchronousTask_2

Created by: Carlos Escobar at: 6/3/2010 2:43 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/3/2010 2:43 PM	Rate (0)
Carlos Escobar Posts: 4 Rating: (0)	good morning¡¡¡¡ someone I could contribute, we are presenting this fails payable are stopping the process by which the CPU is going to stop Event details: 137 of 200 : 08:32:06:912 01.06.10 Event ID: 16# F360:BE02 Additional information 4 / 5: 16# C4 50 Additional information 1 / 2 / 3: 16# 012C 0000 0000 STOP by execution system, cause: Timeout IPOsynchronousTask_2 Incoming event thanks
Carlos Escobar Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

6/8/2010 7:46 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/15/2026 Posts: 22801 Rating: (3073)	Hello, have you a program in the IPOsynchronousTask? The message tell you thats there is no enougth time to calculate the IPOSynchronousTask until the next cycle begin. This error can occur if you have a while loop in you program for this task. Regards Christoph

Suggestion To thank Quote Answer

6/8/2010 9:12 AM	Rate (0)
Manfred Posts: 156 Rating: (17)	Hi Carlos, you can find information about timeouts and level overflows in the documentation Basic_TechnologyFct.pdf, Chap. 5.3.6. Regards Manfred
Manfred Posts: 156 Rating: (17)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on