Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

How to create a subroutine & call it from the main program

Created by: Sumanth at: 6/30/2010 8:41 AM (2 Replies)

Rating (0)

Thanks 2

3 Entries

6/30/2010 8:41 AM	Rate (0)
Sumanth Posts: 1 Rating: (0)	Hi, I'm new to seimens PLC programming. I need help on creating a subroutine & how to call the subroutine from the main program.
Sumanth Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/30/2010 8:55 AM	Rate (0)
Ammy Posts: 1525 Rating: (159)	Sumanth Hi, I'm new to seimens PLC programming. I need help on creating a subroutine & how to call the subroutine from the main program. Hi Sumanth, Here is the Link you will find the tutorials for the Diffrent Type of Tutorials Related to the Simatic Manager, at the Down you will find the Additional Information Which will give you the mor information,
Ammy Posts: 1525 Rating: (159)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users suman.p klsmorgan

6/30/2010 2:28 PM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 1/14/2026 Posts: 12481 Rating: (2722)	Hello Sumanth; In Ammy's suggested document, look especially at FCs and FBs. These are the equivalent to sub-routines or procedures in the S7-300/400 CPUs. Once yoiu create a function [FC10] or a function block with associated Instance Data Block[FB53, DB155], then you can call this logic from OB1 or any other FC/FB in your program. Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on