Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

STL to LAD format

Created by: PISCEAN 2010 at: 7/1/2010 5:55 AM (1 Replies)

Rating (1)

Thanks 0

2 Entries

7/1/2010 5:55 AM	Rate (0)
PISCEAN 2010 Posts: 8092 Rating: (884)	Hi, I have 840Di system with PLC 317-2DP. Its PLC back up format is in STL type. I would like to change it to LAD type. How it can be achieved.? In Simatic Manager, VIEW tab I changed the format to LAD from STL, but of no use. It displays in STL format. Can any one help.? Thanks in advance. DEEP.
PISCEAN 2010 Posts: 8092 Rating: (884)
Suggestion To thank Quote Answer

7/1/2010 6:15 AM	Rate (1)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/6/2026 Posts: 10247 Rating: (1183)	Hello DEEP, In opposite direction is easy. But in direction STL->LAD not always is canvertible the logic. Take a look at Why can't you display an STL program in FBD or in LAD? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on