Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Shift DB Address

Created by: rgray3 at: 7/9/2010 2:36 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/9/2010 2:36 PM	Rate (0)
rgray3 Posts: 2 Rating: (0)	I was wondering if there was an easy way to shift DB addresses? I need to load a real number in and keep track of the previous values. Currently I am doing the following: L #STAT19 T #STAT20 L #STAT18 T #STAT19 ' ' ' L #STAT1 T #STAT2 L #STAT0 T #STAT1 L #NEW_VALUE T #STAT0
rgray3 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/9/2010 2:59 PM	Rate (0)
Aret Posts: 2348 Rating: (265)	Looks like you need a FIFO buffer. Please look at (there is also a link to FIFO implementation) /tf/WW/en/Posts/45298#top
Aret Posts: 2348 Rating: (265)
Suggestion To thank Quote Answer

7/9/2010 3:27 PM	Rate (0)
rgray3 Posts: 2 Rating: (0)	Thank you.....I will look at that.
rgray3 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on