Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

malfunctioning of plc

Created by: Rajput at: 7/12/2010 8:14 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/12/2010 8:14 PM	Rate (0)
Rajput Posts: 10 Rating: (1)	hello, i m using s7300 plc . is there any possibility of malfunctioning by plc .actaully i m facing many problems with it like there is no input but it is giving corresponding output . so plz suggest me how to troubleshoot .
Rajput Posts: 10 Rating: (1)
Suggestion To thank Quote Answer

7/12/2010 9:21 PM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 12/30/2025 Posts: 12477 Rating: (2722)	Mr.Rajput hello, i m using s7300 plc . . Congratulations, and welcome to the forum. . is there any possibility of malfunctioning by plc . . Yes there are... . actaully i m facing many problems with it like there is no input but it is giving corresponding output . so plz suggest me how to troubleshoot . Since your description of the problems is very sketchy, the best thing I can suggest at this time is to read the chapter on Diagnostics from the following manual (Programming with Step 7 v. 5.4): http://support.automation.siemens.com/WW/view/en/18652056 It is quite complete, and will give you many hints on troubleshooting the PLC. Of course, the rest of the manual could be of help too, it covers hardware configuration and programming issues that could help you out. Once you have an idea on how to check the hardware and software issues on your CPU, come back to the forum with more details on your problem. Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on