Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Time interrupt

Created by: KOURTZAAR_HRA at: 7/8/2010 10:04 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/8/2010 10:04 AM	Rate (0)
KOURTZAAR_HRA Posts: 48 Rating: (1)	Hello everybody from greece, I using cpu 313c and in some FC one digital input when change o to 1 set the memory m100.0 and this memory remains set for 100ms with one timer (delay-off), I suppose this time (100ms) is not the same in every cycle from cpu,and my question ishow can isurethis time is always 100ms?I know the OB35 but how can i handle thiw OB?Or it posible to use clock memory from cpu? Thank all for the answer
KOURTZAAR_HRA Posts: 48 Rating: (1)
Suggestion To thank Quote Answer

7/15/2010 7:38 AM	Rate (0)
Jazz_M Posts: 1121 Rating: (86)	Hi If you want to manage your OB you can use SFC39 to 42 blocks that are available in library. Have fun..
Jazz_M Posts: 1121 Rating: (86)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on