Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Small example needed - just to get started using in- and output ports on CPU313C

Created by: kaspergl at: 7/29/2010 4:49 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

7/29/2010 4:49 PM	Rate (0)
kaspergl Posts: 39 Rating: (1)	Hello Does anybody have a small/simple (complete) project for Step7 V5.4 SP5, to an CPU313C PLC, where I can see how I I'm use in- and output ports - digital and analog. No speciel functionen needed... just something where and output is flashing and so on... Some AD example too, would be nice programmet in LADDER... Info: I'm having a "starterkit" with the CPU313C and a "starterkit" with the TP177B Color touch panel Thanks Kasper
kaspergl Posts: 39 Rating: (1)
Suggestion To thank Quote Answer

7/30/2010 4:54 PM	Rate (0)
Jazz_M Posts: 1121 Rating: (86)	Hi Kaspergl I have attached a sample project with Cpu 313 2dp with in built Di and Do and i have written a simple motor logic I have not attached the WinCC flexible part as i have WinCC flexible 2008 sp2 with me Have fun.. Attachment Starter_kit.zip (238 Downloads)
Jazz_M Posts: 1121 Rating: (86)	Last edited by: Tagolover at: 7/30/2010 4:56 PM
Suggestion To thank Quote Answer

8/2/2010 7:53 AM	Rate (0)
kaspergl Posts: 39 Rating: (1)	Thank you very much!!
kaspergl Posts: 39 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jazz_M

|

Share this page:

Share this page on...

Follow us on