Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

WORD to REAL in STEP 7

Created by: vojvoda82 at: 11/20/2010 11:55 PM (3 Replies)

Rating (1)

Thanks 2

4 Entries

11/20/2010 11:55 PM	Rate (0)
vojvoda82 Posts: 21 Rating: (0)	Hello, I'm need to convert variable on adress PIW268 (word type) in a variable of REAL type! Is there any word to integer or word to real block in STEP 7?
vojvoda82 Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

11/21/2010 1:12 AM	Rate (1)
billwest Posts: 510 Rating: (120)	The function Scale, FC105 in the TI-S7 Library will convert an analog value into a real number between the high range and low range values that you enter. Otherwise the process is to use the Int to DI and DI to Real converters. billwest
billwest Posts: 510 Rating: (120)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users vojvoda82

11/21/2010 5:01 AM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 12/29/2025 Posts: 6889 Rating: (1368)	Hi please check this post (How and for which analog measurements can you use the function FC105 "SCALE" to convert the integer values (INT) into real number values?) for more information. regards
	Demo Channel on Youtube
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users vojvoda82

11/21/2010 3:55 PM	Rate (0)
vojvoda82 Posts: 21 Rating: (0)	Thanks! The SCALE function is solve my problem :)!
vojvoda82 Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on