Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

hot swapping

Created by: bocatadeatun at: 10/28/2006 4:19 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/28/2006 4:19 PM	Rate (0)
bocatadeatun Posts: 163 Rating: (3)	Hi, folks Is it possible to disconnect modulesfrom the CPU (in a S7 300)rack without installing them in the ET 200M ?? Thanks !
bocatadeatun Posts: 163 Rating: (3)
Suggestion To thank Quote Answer

10/28/2006 10:08 PM	Rate (0)
saeed Posts: 115 Rating: (1)	Dear Friend Is it possible to ask your question more clearly and explain more? thanx Saeed
saeed Posts: 115 Rating: (1)
Suggestion To thank Quote Answer

10/30/2006 5:27 PM	Rate (0)
Denilson Pegaia Diamond Member Joined: 9/23/2005 Last visit: 12/23/2025 Posts: 4434 Rating: (1487)	hi, for a hot swap of modules, you need an active bus module "under" of the module. Otherwise, there will be a break in the bus. An active bus module, however just be implemented in a ET200M.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on