Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Simodrive 611

Created by: Menal_Murcia at: 10/31/2006 12:50 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/31/2006 12:50 PM	Rate (0)
Menal_Murcia Posts: 7 Rating: (0)	Driver through port RS-232 by means of protool could be controlled. Thanks.
Menal_Murcia Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/31/2006 6:39 PM	Rate (0)
Dave Posts: 271 Rating: (29)	Menal_Murcia, Your first post was with regard to a 6SN1145... Infeed Module. It does not have a RS232C port; however, the 611U plug-in controller have RS232C ports which the SimoCom U software tool is used for commissioning and diagnostics purposes and the 611A main spindle plug-in controller and the ASM controller have RS232C ports as well. For the 611A plug-in controllers the commissioning tool is what is called IBS version 3.3. Protocol information for using some other means of communication to these Simodrive 611 plug-in control units is not available. Hope this helps...
Dave Posts: 271 Rating: (29)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on