Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

2 wiring transducer with CPU 314-C 2DP AI

Created by: First_Automation at: 11/14/2006 4:29 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/14/2006 4:29 PM	Rate (0)
First_Automation Posts: 19 Rating: (0)	Hi, I want to know if I can connect a 2-wiring transducer to an analog input from the CPU 314-C 2DP. We get 4-20mA from a load measuring system but there are only two wires to the transducer. That means that we must connect voltage 24V DC and we get the signal of 4-20mA on the same two wires (see attachment). Does anybody know if it works? And can anyone tell me how I must connect the wires to my analog inputs? Thanks Rollo Attachment 2-wiring_transducer.jpg (774 Downloads)
First_Automation Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

11/14/2006 4:41 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hello Rollo, I think itwill work, see also following link: http://support.automation.siemens.com/WW/view/en/18475312 Hope this will help Best regards, Wizard

Suggestion To thank Quote Answer

11/14/2006 5:17 PM	Rate (0)
First_Automation Posts: 19 Rating: (0)	Thank you. I think this should work. Best regards Rollo
First_Automation Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on