Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Project error

Created by: Roby at: 3/30/2011 12:31 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

3/30/2011 12:31 PM	Rate (0)
Roby Gold Member Joined: 4/10/2006 Last visit: 12/3/2025 Posts: 963 Rating: (2)	Hallo I have a small problem with a S7-300 project... When open this project, appear the follow label: "the project "........." contains internal data errors but this project is correct and works... How i do for remove this label? (see attachment)... Thanh you Roby Attachment f1.jpg (171 Downloads)
	Setting of my PG M6 Siemens OS: Windows 10 Enterprise 22H2; Intel(R) Core(TM) i7-8850H CPU @ 2.60GHz 2.59 GHz - 32G of RAM TIA15.1 Update 8; TIA17 Update 7; TIA18 Update 5 (i use normally)
Suggestion To thank Quote Answer

3/30/2011 1:09 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Dear Roby, Try to save project using another name. Save as... and select the option "With reorganisation slow" Perhaps this thread might also help: /tf/WW/en/Posts/36937 Best regards, Wizard

Suggestion To thank Quote Answer

3/30/2011 1:49 PM	Rate (0)
Roby Gold Member Joined: 4/10/2006 Last visit: 12/3/2025 Posts: 963 Rating: (2)	Dear Wizard.... Ok...... thank you Roby
	Setting of my PG M6 Siemens OS: Windows 10 Enterprise 22H2; Intel(R) Core(TM) i7-8850H CPU @ 2.60GHz 2.59 GHz - 32G of RAM TIA15.1 Update 8; TIA17 Update 7; TIA18 Update 5 (i use normally)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Wizard

|

Share this page:

Share this page on...

Follow us on