Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

UDP in ie general winac 2009. Possible?

Created by: gre_m at: 3/21/2011 10:14 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/21/2011 10:14 AM	Rate (0)
gre_m Posts: 947 Rating: (45)	I make test project on pc-station. On this station I install windows XP sp3, step 7 5.4sp5, winac rtx2009 and simatic net. Ethernet card - realtek. In PC station (hw-config) in slot 2 - WinLC 4.5, in slot 3 (not internal !) IE General. Can i make exchange between this station by UDP and other PC-station? Or is (exchange)it only possible for IE general insert in internal slot?
gre_m Posts: 947 Rating: (45)
Suggestion To thank Quote Answer

4/7/2011 9:21 PM	Rate (0)
jklm Posts: 1742 Rating: (309)	Hello, Do you know this IP V2 driver? http://support.automation.siemens.com/WW/view/en/48354110
jklm Posts: 1742 Rating: (309)
Suggestion To thank Quote Answer

4/8/2011 8:46 AM	Rate (0)
gre_m Posts: 947 Rating: (45)	Hello! I know this decision. It is for WinAC 2005 and this additional cost. I am interested in solutions within the existing product. ADD-on to WinAC in principle and the most we can write
gre_m Posts: 947 Rating: (45)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on