Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

S7-1200 SCL

Created by: Stapro at: 5/12/2011 8:32 AM (2 Replies)

Rating (1)

Thanks 2

3 Entries

5/12/2011 8:32 AM	Rate (0)
Stapro Posts: 15 Rating: (0)	Hi, Wehave Step 7 Basic V10.5 SP2 andwe want to program a S7 1200. We can program in LAD but we want to program in SCL. Is this possible because we can't find the option to program in SCL. Regards, Stapro
Stapro Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

5/12/2011 8:48 AM	Rate (1)
Marcjan Diamond Member Joined: 4/22/2010 Last visit: 3/31/2025 Posts: 5697 Rating: (716)	That's not possible, only Fbd and Lad. STL is back in V11 about SCL for the 1200 check this link /tf/WW/en/Posts/56599#top Best regards, Marcjan
	Last edited by: Marcjan at: 5/12/2011 8:50 AM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Stapro

5/12/2011 9:11 AM	Rate (0)
Stapro Posts: 15 Rating: (0)	Thanks for the fast answer! Best regards, Stapro
Stapro Posts: 15 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Marcjan

|

Share this page:

Share this page on...

Follow us on