Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

online simulation

Created by: Dekriptor at: 2/20/2011 6:21 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

2/20/2011 6:21 PM	Rate (0)
Dekriptor Posts: 2 Rating: (0)	Is it possible to do a offline and online simulation on simatic 1200 like you can do on on logo ?
Dekriptor Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/24/2011 3:25 PM	Rate (0)
Robster Platinum Expert Joined: 5/28/2008 Last visit: 11/11/2025 Posts: 1344 Rating: (141)	I don't know the logo. But a simulation of the PLC is at the moment not possible.

Suggestion To thank Quote Answer

5/13/2011 4:02 PM	Rate (1)
Mr.Kataoka Posts: 10 Rating: (5)	Using LOGO!SoftComfort you realy can do these simulation with LOGO! But with s7-1200 even with TIA11 it's not possible, you can just use the tool "Monitoring". Regards,
Mr.Kataoka Posts: 10 Rating: (5)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users MrPaiva

|

Share this page:

Share this page on...

Follow us on