Navigation

Microbox 427C and ECL Apex 20

Created by: aurel18 at: 6/24/2011 5:36 PM (1 Replies)

6/24/2011 5:36 PM	Rate (0)
aurel18 Experienced Member Joined: 3/2/2011 Last visit: 12/8/2025 Posts: 5 Rating: (1)	Hello, I have project with Microbox 427 C and i need to control a regulator type ECL Apex from Danfos . Is posibile? What soft i need? Thanks

Suggestion To thank

6/27/2011 10:59 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already discussed in the following thread Microbox 427C and NonSiemens Device. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank