Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Save comments in S7-1200

Created by: EloiB at: 6/30/2011 10:12 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/30/2011 10:12 AM	Rate (0)
EloiB Posts: 3 Rating: (0)	Hi to everybody. I am using a S7-1200 PLC (concretely a CPU 1212C) with a firmware 1.0 (I don't have the MC 24Mb to upload the firmware) and I am using TIA Portal Basic V11 (with Update 2). I read with S7-1200 is possible to save the segment comments in the PLC. I have tried to do it but when I try to upload the software from the PLC to the PC the comments will disappears. Has been implemented this functionality? Thank you...
EloiB Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

7/4/2011 4:12 PM	Rate (0)
Robster Platinum Expert Joined: 5/28/2008 Last visit: 1/15/2026 Posts: 1344 Rating: (141)	Hi, Comments will not saved in PLC. Only in Offline project. regards

Suggestion To thank Quote Answer

7/4/2011 4:33 PM	Rate (0)
EloiB Posts: 3 Rating: (0)	First of all, thank you for your answer. About this topic, exist a Siemens Manual that speak about it: Making the transition from S7-200 to S7-1200 (A5E02486860-01) In pag. 11/48, appears this sentence: All tags, block comments, network comments, and instruction comments are downloaded to the S7-1200 controller. This makes it possible to go online with a controller and debug it without the original project. Which is my error when I am asking for this functionality?
EloiB Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

7/4/2011 4:40 PM	Rate (0)
Robster Platinum Expert Joined: 5/28/2008 Last visit: 1/15/2026 Posts: 1344 Rating: (141)	Mh, thats also new for me. Sorry, can't help.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on