Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Finding adresses in STEP 7

Created by: Pandiani at: 12/25/2006 10:33 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/25/2006 10:33 AM	Rate (0)
Pandiani Silver Member Joined: 10/31/2005 Last visit: 4/22/2025 Posts: 366 Rating: (31)	Hello people, first of all, Merry Christmas to everyone who celebrating. I have uploaded STEP 7 project form PLC to PG. It's a pretty large program and during upload all symbolic names are, of course lost. Now, I want to enter comments on specific rungs in specific functions thet are of interest to me. For example,I want to follow where binary input I0.0 is used in theprogram. Since I don't have much experience I need your help. Is there any way STEP 7 can list me all functions and OBs where input I0.0 is used, so I can make comments and follow logic? Are there anything like address reference or similar? Thank you very much
	Last edited by: Pandiani at: 12/25/2006 10:35 AM Last edited by: Pandiani at: 12/25/2006 10:34 AM
Suggestion To thank Quote Answer

12/26/2006 5:16 AM	Rate (0)
siem Posts: 27 Rating: (0)	Hi , you can generate reference data for program,then you can find the data you need. Step 7 manager-->Opition-->Reference data-->Generate, then you get the program reference, in this window , you can definethe filteraccording to your need.
siem Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

12/26/2006 7:35 AM	Rate (0)
Pandiani Silver Member Joined: 10/31/2005 Last visit: 4/22/2025 Posts: 366 Rating: (31)	Thank you for your help. Cheers!
	Last edited by: Pandiani at: 12/26/2006 7:42 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on