Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Problema runtime

Created by: JohanChala at: 7/25/2011 11:29 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/25/2011 11:29 PM	Rate (0)
JohanChala Posts: 59 Rating: (0)	¿Se puede simular el panel de operador con un PLC s7-1200 Sin necesidad de simular con variables?
JohanChala Posts: 59 Rating: (0)
Suggestion To thank Quote Answer

7/26/2011 12:13 AM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 1/16/2026 Posts: 12481 Rating: (2722)	JohanChala ¿Se puede simular el panel de operador con un PLC s7-1200 Sin necesidad de simular con variables? Translation of the request: Is it possible to simulate an operator panel with a PLC S7-1200, without having to simulate with variables? Hola Johan; Por favor usa el idioma Ingles en este foro; tambien se puede usar el aleman, pero en la seccion alemana del foro. Usando ingles con nosotrospodras obtener ayuda de muchos participantes aqui, que no son todos de idioma ingles. Espero ayudarle, Daniel Chartier
	Last edited by: dchartier at: 7/26/2011 12:15 AM
Suggestion To thank Quote Answer

7/26/2011 8:48 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/16/2026 Posts: 9105 Rating: (1204)	Dear Johan, Have you seen this thread: /tf/WW/en/Posts/59537 and this thread: /tf/WW/en/Posts/34588 and this link: Why is communication between the Runtime simulation and the S7-1200 not possible if the PG/PC interface is not set correctly? Best regards, Wizard
	Last edited by: Wizard at: 7/26/2011 8:49 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on